| |
Standard Room Equipments |
|
| |
|
| Gauge Blocks |
| |
Manufactured as per DIN EN ISO 3650.
Material: Steel/Carbide/Ceramic.
Grade: K, 0, 1, 2.
|
Metric/Imperial |
|
Set of 32, 46,47,79,88,112,122. |
|
Gauge blocks in set or individual |
|
Micrometer Calibration set in 10 & 13 pieces. |
|
Long slips in Grade 0,1 & 2 also available upto 1000 mm. |
|
| |
|
|
|
|
| |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
|
| Check Master |
| |
|
Step Gauge in range 300/450/600/1000mm. |
|
Measuring steps of 20mm. |
|
Measurement Uncertainty of calibration (1+1.5 X 10-6L) Microns. |
|
Optional swiveling stand for positioning step gauge in CMM calibration. |
|
Optional software Cal-Check 1.0 for CMM calibration. |
|
| |
|
|
|
|
| |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
|
| Floating Carriage Micrometer |
| |
|
Offers effective calibration of Thread Plug Gauges and Taps. |
|
Provides Major, Minor Diameters calibration of threads. |
Range: 0-100mm/0-4” & 0-175mm/0-7”.
Mechanical /Electronic Model
Resolution: 0.0002mm/ 0.0001 mm
Repeatability: 0.002 mm/0.0002 mm
Accuracy: 0.004mm/ 0.002mm with P10 probe
Accessories: Thread Measuring wires, Prisms, Cylindrical masters & Taper thread plug attachment. |
| |
|
|
|
|
| |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
|
| Dial Calibration Tester |
| |
Calibration of Dial gauges (Plunger & Lever Type) and Bore Gauges. |
|
Suitable for 0.01 and 0.001mm least count. |
|
Interface with Computer for DG Cal Software. |
|
Graphical presentation of errors in both direction. |
Measuring Travel: 0 - 25mm / 1 inch.
Repeatability: 0.0003 mm on Sylvac D80 with P25 Probe.
Repeatability: 0.001 mm on Sylvac Dial. |
| |
|
|
|
|
| |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
|
| Caliper Checker |
| |
|
Designed for the Calibration of all kinds of Calipers & Height Gauges |
|
Hardened and ground steel blocks. |
Range: 300/600/1000 mm.
Accuracy: 0.005mm.
Also available in Inch version. |
| |
|
|
|
|
| |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
|
| Internal MicroChecker |
| |
|
Designed for the Calibration of all kinds of Calipers & Height Gauges. |
|
Hardened and ground steel blocks. |
Range: 300/600/1000 mm.
Accuracy: 0.005mm.
Also available in Inch version. |
| |
|
|
|
|
| |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
|
| Micrometer Check Set |
| |
|
All gauge blocks are made of Alloy steel, hardened and sub-zero treated for dimensional stability and machine lapped housed in rigid housing for ease of Calibration. |
|
Calibration Procedure and manual provided with each instrument. |
|
Calibration stand is provided optionally |
Size of the gauge block: 2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6, 20.2, 22.8, 25mm
Accuracy: Grade 1 slip gauges |
| |
|
|
|
|
| |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
|
| Depth MicroChecker |
| |
|
Calibration and Zero setting of Depth Micrometers. |
|
Master Gauge Block provided as reference point for the calibration of Depth Micrometers at different heights. |
Range: 0-150mm and 0-300mm
Graduation: 25 mm.
Master Slip: 25, 0.0005mm
Accuracy: 0.002 mm and 0.003 mm |
| |
|
|
|
|
| |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
|
| 3 Wire Measuring Set |
| |
|
For micrometer with measuring faces spindle diameter of 6.35, 6.50 or 8.0mm. |
|
Wires are hardened, ground and lapped. |
|
18 sizes of wires available assorted or in a set. |
Range: 0.170 to 3.20 mm. |
| |
|
|
|
|
| |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
|
| Height Master |
| |
|
For measurement of the pitch diameter of screw threads |
|
Suitable for micrometer with measuring faces spindle diameter of 6.35, 6.5 or 8 mm |
|
Wire are hardened, ground and lapped |
|
18 sizes of wires available assorted or in a set |
Range: 5 - 310 mm |
| |
|
|
|
|
| |
|
|
