|
Electronic Gauging |
|
| |
|
|
| |
|
| Air Electronic Gauge |
|
Advantages of Non Contact measurement & Electronics combined. |
|
Data to PC for SPC with Non Contact gauging system. |
|
Special gauges to check relational parameters like Center Distance, Parallelism, Straightness, Squareness, Concentricity and Clearance or Interference between shaft &
bore. |
|
| |
|
|
|
| |
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
|
| |
|
| Electronic Column Gauge |
| Twin Channel Dual Display System with 100 LED. |
|
Contact & Non Contact Gauging. |
|
RS 232 Output to PC Connectivity |
|
Static / Dynamic Reading Mode Max, Min, Avg, tir. |
|
Metric / Inch Readings |
|
Single Try Colur LED. |
|
Tolerance Pointer. |
| Range |
0.010 |
0.025 |
0.050 |
0.100 |
0.250 |
0.500 |
| Bar L.C. |
0.0002 |
0.0005 |
0.001 |
0.002 |
0.005 |
0.01 |
| Six Digit L.C. |
0.0001 |
0.0001 |
0.001 |
0.001 |
0.001 |
0.001 |
|
| |
|
|
|
| |
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
|
| |
|
| Electronic Display Unit |
|
Checking external shafts, crankshaft Pin & Journal diameter. |
|
Range : 10 mm to 150 mm |
|
Corner Jet or Middle Jet |
|
Tungsten Carbide measuring faces and rest pads. |
|
| |
|
|
|
